This is a macOS version of the iOS rtl_tcp SDR app. - Connect, via the rtl_tcp network protocol, to an RTL-SDR USB port peripheral device. - Listen to AM, FM, SSB and CW radio signals - View an RF spectrum and waterfall This app requires either a local or remote rtl_tcp server or similar raw IQ tcp server This app can connect to rtl_tcp for RTL-SDR devices, hfp_tcp for the Airspy HF+ and HF+ Discovery, rsp_tcp for SDRPlay RSP devices, and lmm_tcp for the LimeSDR Mini. Source code and build instructions for many of these servers is available from GitHub. This app can also connect to a Hermes Lite 2 QRP transceiver directly, if it has a known IP address, or through an hl2_tcp server. Note that no support is provided for building or installing any of these rtl_tcp or other tcp servers required to use this app either on your Mac, or on a Raspberry Pi or other remote server. Please see GitHub for repositories containing source code for various suitable rtl_tcp, hfp_tcp, or equivalent servers. Please do not download this app unless you are already familiar with Software Defined Radio, have an RTL-SDR or equivalent SDR peripheral, and have already installed and tested rtl_tcp or work-alike on your Mac, Raspberry Pi, or other server. Note that this app requires a very high bandwidth network connection in order to receive streams of real-time RF samples from an rtl_tcp server.
